Ultra Compact Float Valve

FEATURES:

• Mini compact design suited to confined spaces for automatic filling & maintaining water levels in small feeder bowls, troughs & header tanks
• Ability to attach a diffuser hose to reduce water turbulence & noise in top entry installations & Anti-Syphon Holes to prevent back flow.
• Designed with an adjustable patent pending "Ezi Clamp" arm to make water level adjustment a breeze
• Reliable with high and low pressure applications from 0 - 12 bar
• Durable urethane seat, which is reversible
• Suitable for top entry

TOTAL LENGTH: 30cm

Mini Fast-Flo Installation Guide:

• Flush pipe lines into water tank or troughs before installing Valve into new system.
• Isolate the water going to the bowl, trough or tank to replace valve in an existing system.
• Thread O-Ring end of correct size Long Tail Adaptor into Valve Body and tighten firmly enough that the O-Ring creates a seal against the Valve Body face. Do not over tighten.

NOTE: If there is an existing or moulded threaded inlet in the trough or tank use a Hansen Standard Adaptor.

Place the ribbed side of the Rubber (soft) Washer against the hole inside the bowl/trough/tank. Insert the Long Tail Adaptor through the washer & inlet hole in the bowl/trough/tank wall.

On the outside, place the Poly (hard) Washer on the Long Tail Adaptor with the ribs facing the bowl/trough/tank wall. Thread on Adaptor Nut and tighten firmly. Do not over tighten.

Screw the Mini Fast˜Flo Float onto the Arm and use the Ezy Clamp to move the float to desired position for a water level that suits your requirements.

CLICK HERE FOR ASSEMBLY INSTRUCTIONS